Trying to wire a dimmer control switch on a ceiling fan and need some expert help please!? - ceiling fan remote installation
I have a rotary dimmer switch that I am beside my bed and my son just lights in a ceiling fan trip (you) will receive a separate switch for the fan at a later date so that I control the darkened fire. The son, I have are out of the ceiling = White, Black and Green. From fan = Blue, white and green. The light control switch = 2 is black and green son and for himself. I have a cable firm, white light that I'm off the ventilator for the voltage regulator and moreless just need to know that the son of the top I use for my connections between them. I had this configuration. Cable with a fan at the time when they leave the cable channel and then, but now I have bought a new ceiling fan and do not want to cut on the pull chain. I want the wire at the base. Thanks for any help you can offer me.
Wednesday, January 13, 2010
Ceiling Fan Remote Installation Trying To Wire A Dimmer Control Switch On A Ceiling Fan And Need Some Expert Help Please!?
6 comments:
You can not wire it that way, because one of the two cables from the ceiling with only two son-fan, so it is not even prepared for the fan and lights seprate if n is a fan or remote control.
And what would you be another way to get a fan with a remote control or a fan with a control line of a fan to deal with cables, the work
If you have questions you can send me an e-mail
after electrical code to break the thread.
WHT is neutral, all in connection to connect
Connect the dimmer for the BLK cable box. Connect the other switch wire attenuation over blue fan.
Welcome to be careful. Well, the son of formation of the hook in the ceiling the same way as above, but on the black ceiling hooks into one of the cables are used to change. Now, the other cable (the white ceiling fan at the back of the spine, raw combination of original "., Raw S 2-wire cable going to each of 2 black son of the governor. To be sure, n connect to each other and wrapped with tape After using appropriate cable connectors on them
Welcome to be careful. Well, the son of formation of the hook in the ceiling the same way as above, but on the black ceiling hooks into one of the cables are used to change. Now, the other cable (the white ceiling fan at the back of the spine, raw combination of original "., Raw S 2-wire cable going to each of 2 black son of the governor. To be sure, n connect to each other and wrapped with tape After using appropriate cable connectors on them
Please stop. Call a qualified electrician. It is the law.
Do not do it. Instead of saving a few headaches for the purchase of a fan with remote control for fan and lights.
You only need a hot wire on the roof, so your only option is to work and expensive cabling. And the governor has not done to control the fan speed. Believe me, you do not want to try what I said. They ruin fan or dimmer.
You do not have the necessary cables into the ceiling fan or do what he wants.
Post a Comment